I made my bow from carved expanding foam over a PVC skeleton, filled in the holes with apoxie sculpt & free form air, and then added worbla details and cast resin bow arms with arduino controlled LEDs. You can check out my progress on my facebook (facebook.com/valkyriestudios) or my Golden Bow Progress tag on tumblr (http://katvalkyriecosplay.tumblr.com/tagged/golden-bow-of-quel%27thelas). Thanks for your interest, and good luck!
Kat C.
May 27, 2015 8:44 amHow did you make the bow? I’ve wanted to cosplay my blood elf hunter for the longest time, and she uses this bow.
Kat Valkyrie
May 27, 2015 9:57 amI made my bow from carved expanding foam over a PVC skeleton, filled in the holes with apoxie sculpt & free form air, and then added worbla details and cast resin bow arms with arduino controlled LEDs. You can check out my progress on my facebook (facebook.com/valkyriestudios) or my Golden Bow Progress tag on tumblr (http://katvalkyriecosplay.tumblr.com/tagged/golden-bow-of-quel%27thelas). Thanks for your interest, and good luck!